Step 5 Select the top ellipse and change the fill to the RGB values shown on the left. Apply a solid fill to the other shapes using the values shown.

The RGB percentages shown are for red, green, and blue, in that order.

NOTE: Refer to page 3 if you need help on mixing colors. The colors shown here were chosen from the web safe colors section (the diamond-shaped colors). If you let your cursor rest over the diamond-shaped colors on the screen palette for a second, a Tool Tip will appear with the RGB values (if you've set your Units to 0-255). Refer to page 3 for information for setting the Units settings.